![]() 02/17/2014 at 09:57 • Filed to: None | ![]() | ![]() |
My coolant looks like chocolate milk?
![]() 02/17/2014 at 09:59 |
|
Sound like it might have some oil contamination, which means a blown head gasket.
![]() 02/17/2014 at 10:00 |
|
*plays funeral dirge*
![]() 02/17/2014 at 10:00 |
|
What bloody said. You have oil in your coolant. Bad times.
![]() 02/17/2014 at 10:00 |
|
Blown head gasket
![]() 02/17/2014 at 10:00 |
|
HEAD GASKET
![]() 02/17/2014 at 10:03 |
|
mixing with oil.
Head gasket
radiator (if shared as oil cooler)
Turbo (water/ oil lines mixing in housing)
Clumsy lube tech
or Aliens
![]() 02/17/2014 at 10:03 |
|
what kind of car? Either head gasket or could be transmission cooler leaking if it runs through the radiator
![]() 02/17/2014 at 10:05 |
|
91 318i
![]() 02/17/2014 at 10:08 |
|
1991 318i
![]() 02/17/2014 at 10:08 |
|
mmmm, Strawberry Quik :]
![]() 02/17/2014 at 10:08 |
|
but the engine still runs and there is no smoke out the exhaust?
![]() 02/17/2014 at 10:08 |
|
yup, probably a head gasket then. You should try not to drive it if you can get away with it and take it to a mechanic to have it pressure tested.
![]() 02/17/2014 at 10:09 |
|
is it that bad?
![]() 02/17/2014 at 10:11 |
|
def head gasket on that car. I have a 325es sitting in my drive right now that I will be doing this on once it warms a little. Easy job on the 318 though, take you 6 hours or so if you know what you are doing. Get the head decked while it is off
![]() 02/17/2014 at 10:11 |
|
The break in the gasket could be around one of the oil/coolant channels and not cylinders so you aren't getting coolant in there. An engine will run with a blown head gasket depending on where it is, just not for very long.
![]() 02/17/2014 at 10:14 |
|
Headgasket's gone. Replace rod bearings as well, depending on how bad it is, otherwise you may get the knock soon.
![]() 02/17/2014 at 10:24 |
|
Chocolate milk means (as others have pointed out) that oil is entering your coolant, most likely through a leak in the head gasket. There is also the possibility that coolant has now entered your oil supply as well (check your oil fill cap and dipstick for the same foamy mixture). You'll need a new head gasket which on a 318i isn't too bad but if you have the time & patience to do this:
to your engine. If not then it may cost you around $1k depending on how much labor costs where you live.
![]() 02/17/2014 at 10:25 |
|
You do not add oil here.
![]() 02/17/2014 at 10:33 |
|
ur naut supposed to put chocolate milk in there
(Sorry, I actually scrolled this entire post to see if someone said something similar to this already.)
![]() 02/17/2014 at 11:10 |
|
gee, thanks bro
![]() 02/17/2014 at 11:57 |
|
Just giving you a jab. No offense intended.
![]() 02/17/2014 at 12:28 |
|
Does it taste like chocolate milk?
![]() 02/17/2014 at 18:50 |
|
Quickly sell it. You'll get a buyer that doesn't look at the coolant and you can sell it for a fair market price. Saves you a grand in repairs, and you can go buy a 318iS.
![]() 02/24/2014 at 09:16 |
|
i dipped my fingers in the coolant and rubbed them together. doesent feel oily at all. Also there is no coolant under the valve cover, oil looks normal. is it possible there is something else wrong with the coolant?